€50.00
Use code "10BREEZE" for 10% off your first order
Free shipping on orders over €150
Greece
1–5 days
International
3–10 days
Universal
Fits all vehicles
The Breeze Performance Air Filter is designed for optimal airflow and performance, featuring multiple inlet sizes (60mm, 70mm, 73-76mm) supporting up to 89mm pipes. Its high-performance dry filter element is made from a single-piece molded polyurethane structure with a three-layer design combining steel mesh and high-flow fiber for improved strength and airflow. Note: this filter may affect your air-fuel ratio. We recommend checking it at a professional shop, especially if used alongside other tuning parts.
Each cross-section shows where the air actually goes: what gets in, where it stalls, and how cleanly it leaves. These are illustrative engineering drawings, not CFD results or measured flow rates.
A factory box feeds through one small snorkel, so most of the incoming air never reaches the element. What does get in has to turn, stall in the corners and cross a flat panel before it leaves.
Losing the airbox helps, but a closed front cap makes oncoming air pile up and split ahead of the filter instead of entering. The intake arrows sit on the rear flanks only, and the square-edged neck separates the flow on the way out.
An inlet through the front cap feeds a reverse cone that pulls air straight down the centre, fans it out into the body and lets it circulate through the media from the inside. Add the full-length side intake and a larger outlet, and there is no dead face anywhere on the filter.
Ready to fit yours?
Breeze Performance Air Filter — dry synthetic media with the intake geometry you just walked through.
€50.00
Greece 1–5 days · International 3–10 days
Engineered and tested for enthusiasts
We respond within 24 hours
Real feedback from drivers running this part on their builds.
5.0
Based on 2 reviews
“Shipping was really fast. The air filter in red is really good and stiff! Highly recommended.”
Customer
“Perfect job — quality parts and great support from the Breeze team.”
Enthusiast
| High 98s |
| From 7 µm |
| Breeze PerformanceDry synthetic · Figures stated by Breeze | Within a few % of oiled | 99.1% | 6 µm |
|---|
| Injen SuperNano-WebDry synthetic · Manufacturer claim | Denser media, less flow | 99.53% | Not published |
|---|
| AEM DryflowDry synthetic · Manufacturer claim | Denser media, less flow | Up to 99% | Not published |
|---|
| Typical factory filterOEM paper · Industry baseline | Disposable baseline | Not published | ≈10 µm |
|---|
